Installation Instructions

Once installed, Airofloat stabilizers can easily be taken on or off.

Please click below to download the easy to follow fitting instructions.

Punts and V-punts can be fitted with longer Air-O-Floats than the V-hulls because they generally have less curvature along their sides. Airofloats can not go around sharp bends. Quintrex's that have a flared bow will need to be measured up because the bags must start behind the flare.

If you are having trouble opening the instructions, then click here to download Adobe Reader

Repairing your Airofloats

Cut a patch with rounded corners.

If small hole, force a small amount of adhesive through the hole and allow to dry (about 5 minutes).

Apply adhesive to both surfaces; wait until tacky and press the patch on. Allow 30 minutes to dry if the hole is on a seam. Otherwise 15 minutes.

Contents of Adhesive: 7ml Polyurethane 20%, MEK 75%

Warning: Keep out of reach of children